Mini Microcentrifuges

The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake. Once samples are loaded and the lid is closed, the rotor rapidly accelerates to 6,000 rpm. This speed range is ideal for bringing small droplets to the bottom of the tubes for micro-filtrations or as basic separations. Pressing the lid release button will active the electronic brake, which brings the rotor to a fast stop. The mini microcentrifuge can accommodate up to 8 microcentrifuge tubes or 4 PCR strip tubes. Smaller samples such as 0.2, 0.25, and 0.5 mL can also be processed by using the included tube adapters.

• Quick release rotor system eliminates the need for tools to exchange rotors
• Electronic braking provides rapid deceleration for more efficient sample prep
• Compact, rugged design withstands heavy use in crowded lab environment
• Dual lid switch provides safe operation
• Ergonomic design allows for comfortable handling

Mini-centrifuge/vortex Micro–Spin FV-2400 is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories.

Micro–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

FV-2400 is an “open type” centrifuge (without lid), that increases the speed of centrifugation and resuspension operations.

Specification

Rotation speed (fixed) (50 Hz): 2800 rpm

Max. RCF (50 Hz): 500 x g

Rotation speed (fixed) (60 Hz): 3500 rpm

Max. RCF (60 Hz): 700 x g

Continuous and impulse operation modes: +

Overall dimensions (W×D×H): 120x170x120 mm

Weight: 1.4 kg

Power consumption (230V / 120 V): 25 W (0.1 A) / 30 W (0.27 A)

Nominal operating voltage: 120 or 230 V; 50/60 Hz

Mini-centrifuge/vortex Combi–Spin FVL-2400N is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories.

Combi–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

FVL-2400N is provided with protection mechanism that stops the rotor motion when the lid is opened.

Specification

Rotation speed (fixed) (50 Hz): 2800 rpm

Max. RCF (50 Hz): 500 x g

Rotation speed (fixed) (60 Hz): 3500 rpm

Max. RCF (60 Hz): 700 x g

Continuous and impulse operation modes: +

Safety: Stop at open lid

Overall dimensions (W×D×H): 190x235x125 mm

Weight: 1.7 kg

Power consumption (230V / 120 V): 25 W (0.1 A) / 30 W (0.27 A)

Nominal operating voltage: 120 or 230 V; 50/60 Hz

Centrifuge/vortex Multi–Spin MSC-3000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin). We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation for PCR analysis a “sms–algorithm”.

Multi–Spin is a fully automatic device for reproducing sms–algorithm for 12 tubes at one time, thus saving time considerably. A must-have instrument for PCR and DNA analyses laboratory.

Multi Spin is four devices combined in one:

1. Centrifuge — Maximum RCF: up to 800 × g
2. Vortex (3 mixing modes — soft, medium, hard; regulated time; Vortexing regulation timer 1–20 sec)
3. Centrifuge/Vortex;
4. SMS–cycler for realization of the “sms–algorithm”.

Table to the right compares FVL-2400N, MSC-3000 and MSC-6000

Multi–Spin allows considerable time saving compared to Combi–Spin by automatically performing cycling program of sample mixing and spinning according to the set spin–mix–spin cycle for 12 microtubes simultaneously.

Specification

Speed control range: 1000–3500 rpm (increment 100 rpm)

RCF max.: 800 x g

Spin timer: 1 s – 99 min

Vortexing intensity: Soft, medium, hard

Vortexing time: 0–20 s (increment 1 s)

SMS-cycle regulation: 1 - 999 cycles

Timer sound signal: +

Display: LCD, 2 x 16 signs

Safety: Autostop at open lid

Overall dimensions (W×D×H): 190x235x125 mm

Weight: 2.1 kg

Input current/power consumption: 12 V, 11 W (0.9 A )

External power supply: Input AC 100–240 V; 50/60 Hz; Output DC 12 V

Centrifuge/vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin). We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation for PCR analysis a “sms–algorithm”.

Multi–Spin is a fully automatic device for reproducing sms–algorithm for 12 tubes at one time, thus saving time considerably. A must-have instrument for PCR and DNA analyses laboratory.

Multi Spin is four devices combined in one:

1. Centrifuge — Maximum RCF: up to 2350 × g
2. Vortex (3 mixing modes — soft, medium, hard; regulated time; Vortexing regulation timer 1–20 s)
3. Centrifuge/Vortex;
4. SMS–cycler for realization of the “sms–algorithm”.

Table on the right compares FVL-2400N, MSC-3000 and MSC-6000

Multi–Spin allows considerable time saving compared to Combi–Spin by automatically performing cycling program of sample mixing and spinning according to the set spin–mix–spin cycle for 12 microtubes simultaneously.

Specification

Speed control range: 1000–6000 rpm (increment 100 rpm)

RCF max.: 2350 x g

Spin timer: 1 s - 30 min

Vortexing intensity: Soft, medium, hard

Vortexing time: 0–20 s (increment 1 s)

SMS-cycle regulation: 1 - 999 cycles

Timer sound signal: +

Display: LCD, 2 x 16 signs

Safety: Lid lock

Overall dimensions (W×D×H): 190x235x125 mm

Weight: 2.5 kg

Input current/power consumption: 24 V, 24 W (1 A)

External power supply: Input AC 100–240 V; 50/60 Hz; Output DC 24 V