Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.

Bottle-top dispenser, variable volume

Antal artiklar 12
Sortera
Bottle-top dispenser simplex²,0.2 - 2.0 ml
1621503

VITLAB® simplex² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® simplex² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser simplex²,0.5 - 5.0 ml
1621504

VITLAB® simplex² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® simplex² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser simplex²,1.0 - 10.0 ml
1621505

VITLAB® simplex² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® simplex² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser simplex²,2.5 - 25.0 ml
1621506

VITLAB® simplex² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® simplex² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser simplex²,5.0 - 50.0 ml
1621507

VITLAB® simplex² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® simplex² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser simplex²,10.0 - 100.0 ml
1621508

VITLAB® simplex² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® simplex² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser genius²,0.2 - 2.0 ml
1625503

VITLAB® genius² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime. Reagent loss while bleeding is avoided with the innovative recirculation valve.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® genius² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Dispenser VITLAB® genius² variabel, Volumen 0,5-5,0 ml
1625504

VITLAB® genius² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime. Reagent loss while bleeding is avoided with the innovative recirculation valve.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® genius² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Dispenser VITLAB® genius² variabel, Volumen 1,0-10,0 ml
1625505

VITLAB® genius² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime. Reagent loss while bleeding is avoided with the innovative recirculation valve.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® genius² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser genius²,2.5 - 25.0 ml
1625506

VITLAB® genius² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime. Reagent loss while bleeding is avoided with the innovative recirculation valve.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® genius² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Dispenser VITLAB® genius² variabel, Volumen 5,0-50,0 ml
1625507

VITLAB® genius² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime. Reagent loss while bleeding is avoided with the innovative recirculation valve.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® genius² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Bottle-top dispenser genius²,10.0 - 100.0 ml
1625508

VITLAB® genius² dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The practical screwing mechanism and inner toothed bar enable a fast and precise volume adjustment. The simple-to-use calibration function helps meet all the requirements for test equipment monitoring with minimal downtime. Reagent loss while bleeding is avoided with the innovative recirculation valve.

 

The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel, if dispensing tube is not installed, so that no medium can escape.

 

The dispenser are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall. This latter acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is also coated with a plastic material that reduces the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

 

VITLAB® genius² dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Produkten har lagts i din varukorg Visa varukorgenTill kassan